Summer Starts Here - Save up to 70%
WeatherTech Front Mud Flaps Installation - 2019 Chevrolet Silverado 1500 LD- Video
Today in our 2019 Chevrolet Silverado 1500 LD, we're going to be taking a look at and showing you how to install the WeatherTech easy install, No-drill mudflaps part number WT one, one zero, zero, three, five. These mudflaps are going to do a great job of making sure that no dirt, mud, rock or any other debris is flung up to the rocker panel of your truck. Or even some Nerf bars, you might have installed. Overall, It's going to make sure that the side of your truck stays clean. It's going to have a nice low profile design, and it's going to line up with the contours of our Silverado. It's made from a high-quality thermal plastic resin material. more
1/16/2019 12:27:21 PM
WeatherTech Easy-Install No-Drill Mud Flaps Installation - 2019 Chevrolet Silverado 1500 LD- Video
Today in our 2019 Chevrolet Silverado 1500 LD, we're going to be taking a look at and showing you how to install the WeatherTech easy install, No-drill MudFlaps for the front and rear, part number WT110035-120035.These mudflaps do a great job of preventing your tire from throwing up any mud, dirt, debris, anything that could be on the road, up onto your rocker panels and the bumper of your Silverado. It's made out of a durable thermoplastic resin material, and it's going to be UV resistant. It's not going to crack or fade over time. And it's also going to align with the contours of our Silverado right here. The kit comes with four mud flaps, one for each tire, and it's an easy no-drill installation. It's only going to take you about 15 minutes to get them all installed.Let's go ahead and show you how. more
1/16/2019 12:27:12 PM
WeatherTech Rear Mud Flaps Installation - 2019 Chevrolet Silverado 1500 LD- Video
Today in our 2019 Chevrolet Silverado 1500 LV, we're going to be taking a look at and showing you how to install the WeatherTech Easy-Install No-Drill Mud Flaps for the rear. Part number WT120035. These mud flaps do a great job of preventing your tire from throwing up any mud, dirt, debris, anything that could be on the road, up onto your rocker panels and the bumper of your Silverado. It's made out of a durable thermoplastic resin material, and it's going to be UV resistant. So it's not going to crack or fade over time. And it's also going to align with the contours of our Silverado right here. more
1/16/2019 12:22:10 PM
WeatherTech Rear Pair Mud Flaps Installation - 2018 Ford Expedition- Video
Today on our 2018 Ford Expedition, we're gonna be taking a look at and showing you how to install the Weathertech No Drill Easy Install Mud Flaps for the rear, part number WT120088.Now, they're also available for the front using part number WT110088.So, here's what our mud flaps are gonna look like once we have them installed on our Expedition. These are gonna keep all that road debris from coming back and getting on the back bumper and protect our paint from any kind of rock, chips or scratches. And, if we're towing a trailer, it's gonna keep all that debris off the trailer, as well.Our mud flaps are gonna be digitally contoured, so they're gonna fit all the body lines perfectly. And the mud flaps are gonna be made out of a thermoplastic resin so they're gonna hold up for a long time.Our mud flaps are not gonna require any kind of drilling. They're gonna use all factory holes, as well as stainless steel hardware, so, we're not gonna have to worry about any rust or corrosion.So, now that we've seen what they look like, let's show you how to get 'em installed.To begin our installation, we're gonna come to the rear wheel, and along the edge of the wheel well here, we're gonna have four of these plastic fasteners. You'll want to use the included bit that comes in the kit, and you can use the socket or a bit driver to pull out the center, but I'm threading it, and when you're unthreading it, you want to be careful, you don't want to push too hard, because that center will go back in, but, you want to unthread that screw. more
12/20/2018 2:02:29 PM
Installation of the Weathertech Front Mud Flaps on a 2018 Ford Expedition- Video
Today on our 2018 Ford Expedition, we're going to be taking a look at and showing you how to install the Weathertech No-Drill Easy-Install Mud Flaps for the front. That's going to be part number WT110088. These are also available for the rear using part number WT120088. Here's what our Weathertech mud flaps look like once we have them installed. Now, these are going to keep all that dirt, debris and everything else from coming back onto the fender, the door and our running boards. Our mud flaps are going to help keep those rock chips and rocks from coming and scratching our paint as well as having the water streaking on there whenever it's wet outside.Our mud flaps are going to be constructed out of a thermoplastic resin, so they're going to be nice and strong, and they're not going to fade over time. more
12/20/2018 2:02:13 PM
RoadMaster RoadWing Removable Expandable Mud Flap System Review- Video
Today we're gonna be taking a look at and also showing you how to install the RoadMaster RoadWing Removal Mud Flap System. Available in several different sizes for different vehicle configurations. Where the RoadMaster RoadWing is gonna be a really good solution to help save whatever it is you're hauling, whether you've got an enclosed trailer. In this situation we've got an RV towing a car. On road you're gonna have debris on paved roads. You're gonna have debris to come up, rocks, little pieces of dirt, sand, stuff like that. more
12/18/2018 10:42:33 AM
RoadMaster RoadWing Removable, Expandable Mud Flap System Test Course- Video
Speaker 1: Now let's took a look at our road wing in action. This is going to be very similar to going over potholes, maybe hitting a curb, something like that. This is just going to put a little side-to-side movement in it so you can see how nice and solid it remains on the back of the vehicle.Now, as we're going through our parking lot just doing normal maneuvers, you see it stays nice and flat. We have excellent coverage all the way across the back protecting anything that we're going to haul. more
11/8/2018 9:52:14 AM
Husky Liners Front and Rear Molded Mud Flaps Installation - 2016 Ford F-250 Super Duty- Video
Speaker 1: Today, on our 2016 Ford F-250 Super Duty, we're going to be installing Husky Liners Custom Molded Mud Flaps for both the front and rear with part number HL56681-HL57681.When you're using your truck to get stuff done, it gets dirty and so do its tires. Dirt can be washed off whilst scratches, abrasions and chips can't. These mud flaps will help keep high velocity particles from flying off your tires damaging the paint on your truck. This kit comes with mud flaps for all four wheels, so to protect the entirety of your truck, anything you're hauling behind you and the vehicles around you from debris flying off your tires.These are going to be custom fit for your F-250 Super Duty. They're going to install easily, look great and they're going to span the entire tread width of your tire. They're constructed of a thermoplastic that's going to be flexible and durable. more
9/11/2018 11:42:25 AM
Husky Liners Front Molded Mud Flaps Installation - 2016 Ford F-250 Super Duty- Video
Speaker 1: Today on our 2016 Ford F-250 Super Duty, we're going to be installing Husky Liners Custom Molded Mud Flaps with part number HL56681. When you're using your truck to get stuff done it gets dirty, so do its tires. But dirt can be washed off, while scratches, abrasions, and chips can't. These mud flap'll help keep high velocity particles from flying off your tires damaging the paint on your truck.These are going to be custom fit for your F-250 Super Duty, so they're going to install easily, look great, and they're going to span the entire tread width of your tire. They're constructed of a thermoplastic that's going to be flexible and durable. If you're looking to upgrade your truck to that extra layer of protection, or just to get that heavy duty look, this is perfect gift for you.We'll start our installation by cleaning the area where our mud flaps are going to go. more
9/11/2018 11:42:13 AM
Husky Liners Rear Molded Mud Flaps Installation - 2016 Ford F-250 Super Duty- Video
Speaker 1: Today on our 2016 Ford F250 Super Duty, we're going to be installing Husky Liners Custom Molded Mud Flaps with part number HL57681.When you're using your truck to get stuff done, it gets dirty and so does its tires. But dirt can be washed off, while scratches, abrasions and chips can't. These mud flaps will help keep high velocity particles from flying off your tires, damaging the paint on your truck.These are going to be custom fit for your F250 Super Duty. So they're going to install easily, look great and they're going to span the entire tread width of your tire. The heavy duty thermoplastic is going to be flexible and durable. So if you're looking to upgrade your truck to get that extra layer of protection or just to get that heavy duty look, this is a perfect kit for you.We'll start our installation by cleaning the area where our mudflaps are going to go. more
9/11/2018 11:37:31 AM
WeatherTech Easy-Install No-Drill Mud Flaps Installation - 2017 Ford F-150- Video
Speaker 1: Today on our 2017 Ford F150, we're going to be taking a look and showing you how to install the Weathertech easy install no drill mudflaps for the front and rear, part number WT110050-120050. It's also available for the front only, using part number WT110050 and for the rear only using part number WT120050.So here's what our Weathertech mudflaps look like once we have the installed. Now these are not only going to protect our vehicle, but also our trailer for any kind of road debris and anything flying up that may cause damage to the bottom side of our truck or and cargo that's on our trailer. Now it's going to come with the rear and the front as well. So we're going to have a whole set.Installation's going to be rather easy and we're not going to have to drill anything at all. It's going to use a factory mounting points along with a quick turn knob, that we're going to be able to attach directly to the fender. more
3/5/2018 4:03:45 PM
Access Roctection Mud Flaps Review- Video
Speaker 1: Today we're going to be taking a look at the Access Roctection Universal Mud Flaps for full size trucks and SUVs, part number AC100001. These Roctection mud flaps are going to protect your travel trailer, camper or any other trailer from rocks, road debris or grime. Here on our travel trailer, you can see the aftermath of what happens when we don't have mud flaps. As you can see, it's covered in dirt. There's a few rock chips and tar has even made its way onto it. You can see that when debris hits it, it creates a barrier and prevents it from getting on our trailer. more
2/9/2018 12:42:10 PM
WeatherTech Mud Flaps Installation - 2008 Chevrolet Silverado- Video
Speaker 1: Today on our 2008 Chevrolet Silverado, we're going to be taking a look at and also showing you how to install the WeatherTech Easy Install No-Drill Mudflaps. This is for the front and rear set. The part number is WT110010-120010. If you just need the front, the part number is WT110010, and for just the rears, the part number would be WT120010.Now these WeatherTech mudflaps are going to offer a very quick easy installation. They're going to give us great protection. From the front they help out a lot with the bottom edge of the vehicle, underneath your door or doors here. more
7/31/2017 11:02:19 AM
WeatherTech Front Mud Flaps Installation - 2013 Ford Escape- Video
Today on our 2013 Ford Escape, we're gonna be taking a look at, and showing you how to install, the WeatherTech Mud Flaps, part number: WT110040. These mud flaps are designed to help keep your vehicle clean from road debris and mud. It will block the road dirt from flying up and hitting the side of your car and other motorists. As you can see the mud spatter here on the side of the vehicle, this is what this is gonna prevent. It's gonna be made from a high-quality thermoplastic resin, and it's gonna come in a quantity of two. These are custom fit for your Ford Escape, and they're easy to install. more
6/14/2017 2:54:34 PM
Husky Custom Molded Front Mud Flaps Installation - 2004 Chevrolet Blazer- Video
Today on our 2004 Chevrolet Blazer, we're going to be taking a look at the Husky Liners Custom Molding Mud Flaps for the front, part number: HL56301. Now the Husky Liner Custom Molding Mud Flaps are great for keeping rock, mud, and debris off of your vehicle. Now these mud flaps are going to contour perfectly with our fender flares and follow the factory lines. Now they are wider and longer, so they're going to provide maximum protection, while also giving you full tire coverage. Now these are made of a thermoplastic and they're weather and impact resistant. Now these mud flaps are extremely easy and quick to install, and let me show you how to do that. To begin our installation, we're going to go ahead and clean the area the mud flaps are going to be contacting, and I'll be using just soapy water and a rag. You just want to make sure not to use anything that's going to scratch your paint. more
5/11/2017 10:17:06 AM
WeatherTech Front and Rear Mud Flaps Installation - 2017 Ford F-250- Video
Today on our 2017 Ford F-250 Super Duty, we're going to take a look at and also show you how to install the WeatherTech No-Drill Easy-Install Mud Flaps. These are for the front and the rear. Part number is WT110065-120065. Here's what our mud flaps are going to look like installed on the truck. As you can see, these are going to give us great coverage. They extend well down below the bottom of the vehicle here. These provide an excellent solution for protecting the bottom side of the truck here. As this tire is rotating, it's going to be throwing up dust, rocks, debris, things like that. more
5/3/2017 12:12:24 PM
WeatherTech Front Flaps Installation - 2017 Ford F-250- Video
Today on our 2017 Ford F250 Super Duty, we're going to take a look at, and also show you how to install, the WeatherTech No Drill Easy Install Mud Flaps. These are for the front. Part number is WT110065. Here's what our mud flaps are going to look like installed on the truck. As you can see, these are going to give us great coverage. They extend well down below the bottom of vehicle here. These provide an excellent solution for protecting the bottom side of the truck here. more
5/3/2017 12:12:15 PM
WeatherTech Rear Flaps Installation - 2017 Ford F-250- Video
Today on our 2017 Ford F-250 Super Duty, we're gonna take a look at and also show you how to install the WeatherTech No-Drill easy install mudflaps. Part number is WT120065. Now here's what our mudflaps gonna look like installed. As you can see, we've got an excellent length here. It's not just some small, little, tiny mudflap. It's gonna come all the way down and give us great protection. more
5/3/2017 12:12:07 PM
WeatherTech Front Mud Flap Installation - 2016 Ram 1500- Video
Today on our 2016 Ram 1500 Crew Cab, we're going to be installing the WeatherTech Mud Flaps for the front, part number WT110024. These premium mud flaps are digitally designed to perfectly fit your Ram 1500. They're made out of a high quality thermal plastic resin so they'll protect your Ram, your trailer, and other motorists from rocks, debris, and dirt. They're an easy installation. We'll go ahead and show you that now. Here in the front we can go ahead and start by removing the rock trim panel here. more
1/16/2017 9:10:18 AM
WeatherTech Rear Mud Flap Review- Video
Today we're going to be taking a look at the WeatherTech mud flaps for the rear. Part number WT120024. This is going to fit your 2010-2017 Ram 1500, 2500, and 3500 non-dually, without add-on fender flares. These premium mud flaps are digitally designed to perfectly fit your Ram 1500. They're made out a high-quality, thermoplastic resin, so they'll protect your Ram, your trailer, and other motorists from rocks, debris, and dirt. They're an east installation. more
1/16/2017 9:10:13 AM
WeatherTech Front Mud Flap Review- Video
Today we're going to be taking a look at the WeatherTech mud flaps for the front. Part number WT110024. These are going to fit your 2009-2014 Dodge Ram pickup 1500 series, without add-on fender flares. They're also going to fit your 2010-2107 Ram 1500 without add-on fender flares. These premium mud flaps are digitally designed to perfectly fit your Ram 1500. They're made out of a high-quality thermoplastic resin, so they'll protect your Ram, your trailer, and other motorists from rocks, debris, and dirt. They're an easy installation. more
1/16/2017 9:10:05 AM
WeatherTech Front and Rear Mud Flaps Review wt110024-120024- Video
Today we're going to be taking a look at the weather tech mud flaps for the front and rear, part number WT110024-120024. This is going to fit your 2009 through 2014 Dodge Ram pick up 1500 series without add on fender flares and your 2010 through 2017 Ram 1500 without add on fender flares. These premium mud flaps are digitally designed to perfectly fit your Ram 1500. It comes with a set for the rear and a set for the front. As you can see they fit perfectly with the contour of your Ram. They're made out of a high quality thermal plastic resin so they'll protect your Ram, your trailer and other motorists from rocks, debris, and dirt. more
1/16/2017 9:09:56 AM
WeatherTech Rear Mud Flap Installation - 2016 Ram 1500- Video
Today on our 2016 Ram 1500 Crew Cab, we're going to be installing the Weather Tech mud flaps for the rear, part number WT120024. These premium mud flaps are digitally designed to perfectly fit your Ram 1500. They're made out of a high quality thermal plastic resin, so they'll protect your Ram, your trailer, and other motorists from rocks, debris, and dirt. They're an easy installation. We'll go ahead and show you that now. Here in the rear, first thing we need to do, is remove the rock trim panel here. Now you will have to provide your own tools. more
1/16/2017 9:09:50 AM
WeatherTech Front and Rear Mud Flap Installation - 2016 Ram 1500- Video
Today on our 2016 RAM 1500 we'll be installing the WeatherTech mud flaps for the front and rear, part number WT110024-120024. These premium mud flaps are digitally designed to perfectly fit your RAM 1500. It comes with a set for the rear and a set for the front. As you can see they fit perfectly with the contour of your RAM. They're made out of a high quality thermal plastic resin so they'll protect your RAM, your trailer, and other motorists from rocks, debris, and dirt. They're an easy installation. We'll go ahead and show you that now. more
1/16/2017 9:09:42 AM
WeatherTech Front and Rear Mud Flaps Installation - 2016 Toyota Tacoma- Video
Today on our 2016 Toyota Tacoma, we'll be taking a look at and showing you how to install the WeatherTech Mud Flaps for the front and rear, part number WT110055-120055. The WeatherTech Mud Flaps are made out of a high quality thermoplastic resin, and our digitally contoured to fit your Tacoma. The mud flaps are a great option to protect your truck, trailer, and other vehicles from dirt and debris. The mud flaps are easily installed. There's no drilling or tire removal required. You just simply use two screws that are already with your fenders. more
9/22/2016 11:21:09 AM
WeatherTech Front Mud Flaps Installation - 2015 Ford Transit Transit T350- Video
Today on our 2015 Ford Transit T-350, we'll be showing you how to install the WeatherTech mud flaps for your front tires, part number WT110051. Now, here on our passenger side, we already have our front mud flap in place. This is a no-drill quick application, and you won't have to remove your tires to install it either. The mud flaps are made from a high quality thermoplastic resin. The WeatherTech flaps secure with a quick turn stainless steel fastener. To start off with our install, we want to make sure we have the correct mud flap. The driver's side is labeled "LH" on the back, and the passenger side is labeled "RH." We want to make sure our tire is rotated all the way towards the left. We're going to make sure that our quick turn fastener's all the way towards the right, or the unlocked position. more
9/7/2016 11:12:11 AM
WeatherTech Front Mud Flaps Installation - 2016 GMC Sierra 2500- Video
Today on our 2016 GMC Sierra 2500, we will be taking a look at and installing the WeatherTech Front Mud Flaps, part number WT110036. First thing we're going to do on the installation of our front mud flaps is to locate the screws that we're going to use to mount our mud flap. We take our mud flap and hold it up into position to kind of get a better understand of where it's going to go. We'll have to remove this one here and this one here. If your vehicle is equipped with a third one, it will be located right here. Go ahead and remove those two screws and set them aside for reinstallation once we have our mud flap in place. more
1/14/2016 3:01:32 PM
WeatherTech Rear Mud Flaps Installation - 2016 GMC Sierra 2500- Video
Today on our 2016 GMC Sierra 2500 we're doing a test fit of the Weathertech mud flaps. That part number is WT120036. Now, these are going to be our rear mud flaps. It's going to be a no drill process, very easy to install and it comes in two pairs, so there you have our driver side rear den. As you can see it's going to form perfectly fit under there and it's just going to be a really easy simple installation. So we head over to our passenger side, we'll be able to show you our back passenger here. I've already got my flap ready. more
1/12/2016 11:42:02 AM
Husky Liners Rear Mud Flaps Installation - 2015 GMC Sierra 3500- Video
Today on our 2015 GMC Sierra 3500 we'll be taking a look at and installing the Husky liners custom molded rear mudflaps. Part number HL57871. Now this is what they look like once they're installed. The Husky liners mudflaps ate going to protect your vehicle and the vehicles behind you from mud, rocks, and flying debre that may be kicked up off the road. These mudflaps will also ensure the trailer that you are pulling or towed vehicle or boat last longer and look better. These mudflaps are going to contour and form fit to the exterior vendors of your vehicle for maximum coverage. Longer and wider than most OEM flaps. Full tire coverage, and a custom fit to your vehicle. Black and textured finish for a sleek and stylish design for your vehicle. more
12/3/2015 12:57:02 PM
Husky Liners Front Mud Flaps Installation - 2015 GMC Sierra 3500- Video
Today on our 2015 GMC Sierra 3500 we will be taking a look at and installing the Husky Liners, custom molded front mud flaps, part number HL56891. The Husky Liners custom fit mud flaps are gonna protect your vehicle from mud, rocks, and road debris. They are extremely durable and made from a molded thermal plastic construction that's gonna be both weather and impact resistant. They are gonna offer a sleek, contoured design with a black finish. The contour and form fit exterior fenders are gonna provide maximum coverage. They are gonna be longer and wider than most OEM flaps and have full tire trade coverage. Now let's go ahead and see how they are installed. more
12/3/2015 12:56:51 PM
WeatherTech Front Mud Flaps Installation - 2003 Ford F-250- Video
Today on this 2003 Ford F250 Super Duty, we're going to show you part number WT110001. This is the WeatherTech mud flaps. These are constructed from a high quality thermoplastic resin. As you can see here, it has a nice finish to it and they are stiff but they can move if need be. If you've got road debris it can take some abuse. These are designed to fit the exact truck. more
4/1/2015 9:58:56 AM
WeatherTech Rear Mud Flaps Installation - 2003 Ford F-250- Video
Today, on this 2003 Ford F250 Super Duty, we're going to show you part number WT120001. This is Weather-tech Mud Flaps, inaudible 00:00:11 tires and wheels. A few things to know about it, these are constructed from high quality thermal plastic resin, which do hold their shape really nice but they are flexible in case something hits it. These are designed to fit the exact truck. As you can see it matches the contour of the fender wheel all the way up. I use the existing fasteners or it comes with new hardware as needed. There is no drilling required. more
3/24/2015 11:37:55 AM
WeatherTech Rear Mud Flaps Installation - 2013 Ford F-350- Video
All right, today in this 2013 Ford F350 Super Duty Crew Cab we're going to show you part number WT120030. This is the WeatherTech MudFlaps border rear tire and wheels. We're having them installed in the driver's side of our truck and we'll go ahead and see how they look. We'll start from the top and you see you how it matches up to the contour of the factory framing wheel all the way around and down even past the bottom probably by about 4 inches. That provided coverage for the inside tire as well. For the bottom of the fender wheel down to the bottom it'll be about 9 and 3/4-inches. Now, there's no drilling involved and you can do all the hard work to install it. All the attachment points that are facing towards the tire are stainless steel hardware. They're very flexible but definitely hold their shape. more
2/16/2015 8:19:46 AM
WeatherTech Front Mud Flaps Installation - 2013 Ford F-350- Video
Today in this 2013 Ford F350 super duty crew cab, we're going to show you part number WT110020. This is the WeatherTech mudflaps for the front wheels. Now we have one of them already installed on the driver's side of the truck, and you can see how it matches with the contour of the body work on the truck. You can see where the bodywork goes into the mudflap right through here. Now this is a no-drill installation, it uses the factory attachment points here and here. It also uses the factory hardware as well. It does come with inaudible 00:00:34 hardware on the bottom on the other side. Now hardware inaudible 00:00:37 is included with the kit, it is all stainless steel. It's semi-rigid where it goes up towards the bodywork, but it's also flexible at the bottom a little bit as well. more
2/11/2015 2:54:07 PM
WeatherTech Front and Rear Mud Flaps Installation - 2013 Ford F-350- Video
Today on our 2013 Ford F350 Super Duty Crew Cab, we'll be showing and installing the WeatherTech Front and Rear Mud Flaps, part number WT110020-120030. We've gone ahead and installed them on our passenger side. You can see how they match into the contours of the bodywork. This will be a no-drill install and either use existing hardware or provide the hardware as needed to install. They're more semi-rigid closer to the vehicle with more flexibility towards the bottom. From the bottom edge of the bodywork to the bottom edge of the mud flap, will be about 8" for the front and about 9-3/4" for the rear mud flap. Now let's show you how they install. more
1/30/2015 12:17:52 PM
WeatherTech No-Drill Front Mud Flaps Installation - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevy Silverado, we'll be installing the Weather Tech Front Mud Flaps part number WT110010. Now to begin our install, we'll first going to go ahead and take the tire and turn it out to give us more room to install the mud flap. You can see that we can get to all four fasteners that we'll need to work with. Next just using some water and cleaner we'll go ahead and remove the dirt, dust and debris that is build up here. By removing the dirt, dust and debris, it will help prevent any scratching of the paint when it gets trapped between the mud flap. All right, next we'll go ahead and remove the 2 bottom push pin fasteners. To remove the fasteners, we'll pry out on the center of the fastener using a flat blade screwdriver, work that center fastener out. more
12/6/2014 8:23:17 AM
WeatherTech No-Drill Rear Mud Flaps Installation - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevy Silverado, we are going to be installing the Weather Tech Mud Flaps for the rear axle part number WT120010. Now to begin our install, we are first going to go ahead and clean the painted surface where our mud flap will be installed, just using a soup and water solution and a cleaner, spray it down and then wipe it off. Now once we've got it cleaned up, we'll go ahead and identify the driver side. Here marked into the mud flap will be LH for left hand which is also known as the driver side. Then we have 3 attachment points, the plastic hook which will go over on the metal fender and then 2 twist locks that will turn and lock into place securing the mud flap. Provided with the install kit is an Allen Wrench to tighten down the twist locks or if you have a set of Allen sockets you can use that also. First we'll slide the plastic hook in the bottom over the metal fender lip and we'll hold the mud flap uptight and tighten down the Allen screws that will lock it into place. more
12/6/2014 8:21:37 AM
WeatherTech Rear Mud Flaps Installation - 2015 Chevrolet Silverado 2500- Video
Today on this 2015 Chevrolet Silverado 2500 Crew Cab we're going to install part number WT120035. This is the WeatherTech Mud Flaps. This part number is for the rear of the truck. First off, we're looking at the passenger side and we need to remove these two fasteners, these torques bit fasteners. The nice part about the kit is it supplies you with the torques tool that you need, but this is all you get. To make things a little easier you could actually use a ratchet with a quarter inch socket and use it to remove the screw. more
9/30/2014 12:23:22 PM
WeatherTech Front Mud Flaps Installation - 2015 Chevrolet Silverado 2500- Video
Today on our 2015 Chevrolet Silverado 2500 Crew Cab, we're going to install part number WT110035. This is WeatherTech Mud Flaps for the front wheels. To install a mud flap, they'll be four screws that we have to remove. I use a small torque split to do that with. The mud flaps do come with the inaudible 00:23. It may be a good idea to go ahead and install it with a quarter inch socket. You can use it inaudible 00:29 ratchet. more
9/24/2014 5:05:36 PM
WeatherTech Front and Rear Mud Flaps Installation - 2013 GMC Sierra- Video
Alright, today on this 2013 GMC Sierra, we're going to install part number WT110011-120011. This is the front rear mudflaps from Weathertec. To start off our install, it's always a good idea to make sure the paint around the fender well is completely clean. That way, when we install the mud flaps, there won't be any dirt and debris caught inside to mess up the paint. Now, these mud flaps are very easy to install. We're going to start with the back of the truck, first. We'll work with the passenger side. more
9/17/2014 12:04:54 PM
Husky Rear Mud Flap Installation - 2013 GMC Sierra- Video
Today on our 2013 GMC Sierra, we'll be installing the Husky Custom Modeled Rear Flaps, part number HL57801. To begin our install we'll go ahead and put the mud flap in position and then mark it with our pencil. This will mark the top of the decal that will be the protective film between the mud flap and the paint. Now we'll go ahead and set the mud flap down, use our spray solution and then install the decal starting just above our marked point working our way down. Once in place, we'll then take a squeegee and push out any excess solution from underneath the decal. Now we'll go ahead and wait for everything to dry and for the decal set up. Now with the decal set up we're ready to install the mud flap. We'll go ahead and put in place and using the pre-drilled holes in the mud flap as a template, drill out our four attachment points. more
9/10/2014 1:29:55 PM
Husky Front Mud Flap Installation - 2013 GMC Sierra- Video
Today on our 2013 GMC Sierra we'll be installing the Husky custom molded mud flaps for the front wheels, part number HL56801. Note: in order to access the mud flap easily, we're going to go ahead and turn the wheels all the way out, for easier access. To begin our install, we'll first need to remove three of the manufacturer's fasteners. Starting at the lower inner most fastener working our way up, we'll remove the two push pin fasteners and one screw. We'll set these aside as they will not be re-installed. Then we'll pull back on the wheel well liner, exposing the metal lip underneath where the fasteners just went through. Again starting at the bottom inner fastener we'll install two metal clips where a push pin fasteners were. Quick note: you'll want to make sure the paint is very clean and dirt free as the decal will lay over any dirt that's left on the paint. Once we have the metal clips installed, we're ready to go ahead and test fit our mud flap. We'll set the mud flap into position then using a pencil we're going to mark the top of the mudflap. This will allow us to line up and install the protective liner to protect the paint from the mud flap wearing over time. Now with our mark made we're ready to go ahead and apply the application solution. more
9/2/2014 9:44:01 AM
Husky Rear Mud Flap Installation - 2014 Ram 1500- Video
Today on our 2014 Doge Ram pickup, we'll be installing the Husky custom molded mud flaps, part number Hl57151. To begin our install, on this application we'll need to remove the older manufacturer's rock guards. These are held on by a total of four fasteners. To remove the two push pin fasteners, go ahead and take a flat blade screwdriver or a trim panel tool, pry the center of the fastener out, and then remove it completely. Then we'll go ahead and take the two screw fasteners out. Now we can remove the guard. more
6/9/2014 10:09:44 AM
Husky Front Mud Flaps Installation - 2014 Dodge Ram- Video
Today on our 2014 Dodge Ram pickup well be installing the Husky custom molded mud flaps for the front wheels, part number HL56171. To begin our install well first need to remove the older manufacturers rock guards. For this application there are two screw fasteners on the inner fender well and one push pin fastener. To remove the push pin fastener Ill use a flat blade screw driver and get between the two pieces, prying the center section out and then removing the whole thing. Well go ahead and take the push pin fastener and reinstall it in the bottom of the fender. Using a soap and water solution were going to go ahead and thoroughly clean the fender where our new mud flap will sit. more
5/13/2014 5:01:06 PM
Husky Rear Mud Flaps Installation - 2014 Chevrolet Silverado 2500- Video
Today on our 2014 Chevy Silverado, we'll be installing the Husky custom molded mud flaps, for the rear axle, part number HL57791. Note for this install, I am going to go ahead and remove the rear wheels as it is going to make it easier to install the mud flaps. Now that the rear wheels removed, we'll go ahead and clean the surface around the area where we'll be mounting the mud flap so the dirt won't be embedded to the paint when it get sandwiched between the mud flap and the paint. We'll go ahead and set our mud flap in place. If you look carefully, on the mud flap, it will indicate LH for left side or driver side, and RH for right-hand or passenger side, to know any which mud flap will go on either side. We'll go ahead and set the mud flap into position and using a pencil, mark the top of the mud flag, because next we'll be applying the paint protection film that we'll want to extend just beyond the edges of the mud flap. Next we'll apply an install solution and then we can go ahead and take the film and set it in to place. Once we get in to position, we'll then go ahead and dry it. more
4/4/2014 1:42:02 PM
Husky Front Mud Flaps Installation - 2014 Chevrolet Silverado 2500- Video
Today on our 2014 Chevy Silverado we'll be installing Husky custom molded mud flap for the front axle part number Hl56791 . Now to begin our install, we first go ahead and remove the front wheels to make it easier to remove the mud flaps. Next we'll go ahead and clean the painted surface where the mud flaps will be mounted. Now as it's thoroughly cleaned, we apply an application solution and a protective film that will go underneath the mud flap to prevent the mud flap from rubbing directly on the paint. We'll use dry cloth and or a squigy or a sponge to push the application solution out from under the film and and then allow it to dry. Now, once our protective film is dried, we're ready to install the mud flaps. To install this mud flap, we first remove three of the manufacturers fasteners. more
3/25/2014 1:10:52 PM
DeeZee Mud Flaps - Custom Fit - DZ27940 Review- Video
Today, we'll be reviewing part number DZ27940. These are the Dee Zee OEM-style mud flaps. They're in black, made from a plastic material and they're for the rear of your pick-up. These are custom fit by vehicle, make and model, so they're going to provide a really nice fit on your 2004 to 2014 F150. They install in the rear. Keep in mind, they're not going to fit pick-ups with fender flares. more
3/10/2014 3:28:32 PM
WeatherTech Front and Rear Mud Flap Installation - 2013 Ford F-150- Video
Today on this 2013 Ford F150, we'll be installing the WeatherTech no-drill mud flaps for the front and rear, part number WT110002-120002. Before we start our install, we're going to go ahead and turn the wheels to one side to make it easier to get to the fasteners. Now there are two fasteners on the bottom edge of the fender wells towards the bottom. We'll go ahead and remove these two screws. At this point, it would be a good idea to have a test fit of the mud flap against the fender well to see how it fits against it. You also want to make sure the attachment point on top is in its unlocked position. more
7/9/2013 10:52:34 AM
WeatherTech Front and Rear Mud Flap Installation - 2002 Chevrolet Silverado- Video
Today on our 202cs, we'll be installing the WeatherTech easy-install, no-drill mud flaps for the front and rear, part number WT110006-120006. We'll begin on the driver's front. We'll need to go ahead and remove a couple of the plastic fasteners that hold the inner fender liner in. You can do this by either using a flat head screwdriver. Or if you happen to have an auto fastener removal tool, that works, too. There are also two holes in the actual fender that have nothing in it before you started, that will get two plastic push rivets pushed into them. more
7/5/2013 12:39:17 PM
Husky Front Mud Flap Installation - 2012 Dodge Ram- Video
Today on our 2012 Dodge Ram Pickup, well be installing the Husky Custom-Molded Mud Flaps for the front wheels, part number HL56171. First well go ahead and remove the older manufacturer mud flap. There are a total of three fasteners to be removed; two on the inner wheel well and one underneath the rocker panel. Well hang onto the two screws on the inner wheel well, as well use them to install the new Husky mud flap. Now with the old one off, well go ahead and clean up the area and prepare to install the new one. With the area cleaned and dry, well go ahead and set the new mud flap into position using the old fasteners to line up the mud flap. more
3/22/2013 12:38:58 PM
